1. Jobmate Manuals

JobMate Owner's Manual. 99-2860 JM T31 19.2V Cordless Drill Kit English French Price List 99-2973 Circular Saw French Price List 99-2973 Drill English French. Jobmate miter saw manual How do I remove the blade? - Saws question.

Hi there You do not need to remove the blade gaurd to change the blade. You only need to raise it enough to acces the blade screw. Unplug the saw.

Raise the blade arm. Raise the guard to it's upper position. On the left side of the blade, just forward and up slightly from the blade screw is a screw for the guard bracket. Loosen, but do not remove this screw.

Jobmate Manuals

Once it's loosened the guard can be raised farther exposing the blade screw. Pg 6 of the manual illustrates this process, here's a link so you can see the parts I am discribing, # click the pdf icon next to instruction manual, then open the file. As for the blade wrench, this should have come with the saw, there is a slot in the base for storing the wrench, on the back left side, it slides in and out for safe keeping. If you have misplaced the wrench the DEWALT part number 608563-1 Dec 31, 2010. Exploded diagram for your SM100M miter saw is.

User manual is. Page 20 covers blade change operation. Make sure you unplug your saw! You need to remove a screw from the cover and rotate the cover to the rear.

Use a hex wrench in the motor shaft to keep the saw blade from turning, and loosen the arbor nut with a 1/2' wrench. The arbor is reverse threaded, so you'll turn it clockwise to loosen, then counterclockwise to tighten it up after you have swapped the blade. Rotate the cover back after that's done, and replace the screw. If this was useful, please vote.

Nov 23, 2009.